LANSKY Leather Stropping Hone

Leather Stropping Hone for use with Lansky Sharpening Systems. Stropping with leather is an age old technique for polishing a blade edge that delivers unparalleled results.
This Leather Hone is used only on blades that are already extremely sharp. Leather strop is used by moved away from the blade edge, please read instruction before use.

Instructions
Leather Stropping Hone Instructions

To be used with any of the Lansky Controlled Angle Systems to achieve a razor sharp mirror-polish on your blade's edge.
The Stropping Hone can be used dry but using a jeweler's rouge will help increase the lifespan of the leather hone.

Step 1- Attach the hone to a Guide Rod. If using jeweler's rouge: apply rouge to Leather Stropping Hone and then attach the hone to a Guide Rod.
Watch starting from minute 1:45 of our Sharpening Instructional Video for a proper assembly of the Guide Rod and Hone.

Step 2- Using the angle that you sharpened with previously (matching the pre-existing angle of the knife), insert the guide rod into the guide hole of the clamp.

Step 3- IMPORTANT!: Rather than push the hone against the edge like you would with other hones.
The Leather Stropping Hone requires that you pull the hone away from the edge.
This will polish any burr or wire edge off your blade and leave you with a polished finish.